GA-IMB1900N, GA-IMB1900TN
Key Features
1. Intel® Celeron Baytrail SoC Processor
2. Integrated Intel® Gen7 Intel Graphics DX 10
3. Supports Dual Channel DDR3L 1333MHz, 2 x SO-DIMM, up to 16GB system memory
4. 1 x HDI, 1 x D-Sub, 1 x Dual Channel 24-bit LVDS
5. 4 x USB 3.0, 4 x USB 2.0, 2 x SATA3
6. 1 x mini-PCIe, 1 x M.2 SSD, 1 x M.2 Wifi slot
7. Gigabit LAN : 2 x Intel i211AT Lan
8. 1 x TPM Module IC(Optional)
9. 12/19~24 V DC-in
Specification
CPU 1. Built in with an Intel® Quad-Core Celeron® J1900 SoC (2.42 GHz)
* Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to these components.
2. 2 MB Cache
Memory 1. 2 x DDR3L SO-DIMM socket supporting up to 16 GB of system memory
2. Dual channel memory architecture
3. Support for DDR3L 1066/1333 MHz memory module
(Please refer "Memory Support List" for more information.)
Onboard Graphics
Integrated in the SoC:
1. 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz
2. 1 x HDI port, supporting a maximum resolution of 1920x1200@60 Hz
Maximum shared memory of 512 MB
Audio
1. Realtek® ALC887codec
2. High Definition Audio
3. 2/4/5-channel
LAN
1. 2 x Intel® i211AT GbE LAN chips (10/100/1000 Mbit)
Expansion Slots
1. 1 x PCI Express x1 slot
2. 1 x Mini PCIe slot (MINI_PCIE)
(The PCIe Express x1 and Mini PCIe slots conform to PCI Express 2.0 standard.)
Storage Interface Integrated in the SoC:
1. 2 x SATA 3Gb/s connectors
2. 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe x1 SSD support)
* The M.2 connector operates at up to x1 mode.
3. 1 x mSATA co-lay with mini PCIe
USBChipset:
Integrated in the SoC:
1. 4 x USB 3.0 Gen 1 ports on the back panel
2. 4 x USB 2.0/1.1 ports available through the internal USB headers
Internal I/O Connectors
1. 1 x 4-pin ATX 12V power connector
2. 1 x CPU fan header
3. 1 x system fan header
4. 2 x SATA 3Gb/s connectors
5. 1 x M.2 Socket 3 connector
6. 1 x SATA power connector
7. 1 x front panel header
8. 1 x front panel audio header
9. 1 x battery cable header
10. 2 x USB 2.0/1.1 headers
11. 4 x serial port headers
12. 4 x serial port power select jumpers
13. 1 x D-Sub header
14. 1 x LVDS header
15. 1 x LVDS drive voltage jumper (LCD_VCC)
16. 1 x flat panel display header (FPD)
17. 1 x flat panel display power select jumper (FPD_PWR)
18. 1 x flat panel display switch header (MON_SW)
19. 1 x backlight switch header (BL_SW)
20. 1 x digital microphone header (DMIC_CON)
21. 1 x speaker header (SPKR)
22. 1 x buzzer header (SPEAKER)
23. 1 x chassis intrusion jumper
24. 1 x LPT/GPIO header (LPT_GPIO)
25. 1 x LPT configuration jumper (LPT_SEL)
26. 1 x GPIO power selection jumper (GPIO_PWRSEL)
27. 1 x GPIO status configuration jumper (GPIO_SET)
28. 1 x BIOS Select jumper (BIOS_SET)
29. 1 x Clear CMOS jumper
Back Panel Connectors
1. 1 x HDI port
2. 1 x D-Sub port
3. 4 x USB 3.0 Gen 1 ports
4. 2 x RJ-45 ports
5. 2 x audio jacks (Line In, Mic In)
6. 2 x Serial ports
I/O Controller
1. iTE® I/O Controller Chip
H/W Monitoring 1. Voltage detection
2. Temperature detection
3. Fan speed detection
BIOS 1. 1 x 64 Mbit flash
2. Use of licensed AMI UEFI BIOS
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Unique Features1. Support for Xpress Install
2. Support for @BIOS
3. Support for APP Center
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications
Bundled Software 1. Norton® Internet Security (OEM version)
Operating System
1. Support for Win 7 32/64-bit, Win 10, LINUX
Form Factor 1. Thin Mini-ITX Form Factor; 17.0cm x 17.0cm
Operating Temperature 0°C to +60°C
Remark 1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website. 2. Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP. If drivers are available from the vendors, we will update them on the GIGABYTE website.
    
|